EN
YOUR POSITION:HOME > Products > Non Woven Fabrics >

SSS Soft Hydrophilic Spunbond Non Woven Fabric For Diaper Making

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Adult Diaper,Baby Diapers,Sanitary Pad
Minimum order quanity: 1000.00 kgs
Packing details: Transparent wrapping film with paper board

CATEGORY

Soft hydrophilic non woven fabric

APPLICATION

Topsheet & wrapping non woven fabric for

medium grade diapers, pull-ups, sanitary

napkin and under pads.

WIDTH & BASIC WEIGHT

Width 70-3200mm

Basic weight 10-200g/m²

CHARACTERISTIC

Soft;

Non woven fabric surface is uniform,Hydrophilic agent is stable, whiteness is good

The performance is stable, and it is not easy to shrink and wrinkle;

Excellent aging resistance;

ISO & SGS certificate.

USING INSTRUCTION

Using side inside, glue side outside;

Be careful not to damage the non woven fabric when cutting the packaging with a blade;

After the non woven fabric is unpacked, it can be left for a period of time to make the non woven fabric more softer.

PRECAUTIONS  

Before using, please pay attention to check

if surface is clean and tidy and whether there is hole and dirt.     

TECHNICAL PARAMETERS

(15g/m² non woven fabric)


Item

Unit

Target

Result

Color

White

White

Inner core

mm

76±1

76

Width

mm

120±2

120

Basic weight

g/m2

15±1.5

14.95

Through time

S

1st: ≤2

1.43

2nd: ≤3

1.76

3rd: ≤4

2.26

Breaking tension

MD

N/5cm

≥22

 29.8

CD

≥9

15.1

Breaking elongation

MD

%

≥30

98.87

CD

≥30

114.84

Softness

MD

g

≤2

0.8

CD

≤4.5

1.9

Martindale

level

≥3.5

≥4

STORAGE AND TRANSPORTATION

①Storage and handling

1. Anti-fouling, moisture-proof, fire-proof, waterproof.

2. The product should be placed in a ventilated and dry warehouse at room temperature, avoiding direct sunlight, and it is strictly forbidden to store in bulk.

3. The height of roll packing cannot exceed 3.2m high.

4. When handling, non woven fabric can not be stressed, or can not be dropped from a high place,avoiding out of shape.

②Transportation

1. Before shipment, it is necessary to check whether the surface of the outer packaging of non woven fabric is clean.

2. To ensure that the packaging rolls in the container not fall over to prevent product damage.

3. The container must be checked before loading, make sure that there is not holes or sharp objects on the walls of container.

4. The container must be odorless, without oil or pollutants.

③The storage life is 36 months.


Related Resource


Application Industry
Our safe and stable products are widely applied in the field of disposable hygiene products and are used to make products that are not limited to the following:
Know More about Applications
Why Choose Juhua Materials Manufacturer In China
Juhua Is Professional Manufacturer Of SSS Soft Hydrophilic Spunbond Non Woven Fabric For Diaper Making,
We have strong power to support our production, from factory environment
construction to equipment configuration, all leading to high quality products.
Baby Diaper Raw Materials
Raw materials
for hygiene products
Baby Diaper Raw Materials
Win-Win benefit
Baby Diaper Raw Materials
Mix loading
Baby Diaper Raw Materials
High quality&
Good Service
SSS Soft Hydrophilic Spunbond Non Woven Fabric For Diaper Making
Related Quality Control
Printing Detection
Printing Detection
The printing online defect detector detects the product printing process of each roller, and the detection accuracy of the ink dot defect is ≥0.1㎡.
We Formulate a Strict QC Institution
We Formulate a Strict QC Institution
We create a quality environment for the SSS Soft Hydrophilic Spunbond Non Woven Fabric For Diaper Making. A better environment leads to systematic production of premium quality . In addition, we have set up a special laboratory for quality inspection.
We Create the Environment for QC
We Create the Environment for QC
The factory environment is the basis of production. We create a quality environment for the production of disposable hygiene product raw materials, build a fully sealed dust-free workshop, and purchase the most advanced high-speed production equipment.
Width Measurement
Width Measurement
In the production process, the SSS Soft Hydrophilic Spunbond Non Woven Fabric For Diaper Making which is off the slitting machine will be width tested with a tape measure, and width error range should be controled in ≤ 2 mm.
SSS Soft Hydrophilic Spunbond Non Woven Fabric For Diaper Making Manufacturing
01
Fiber/Raw
Material
Preparation
02
Laying
03
Bonding
04
Finishing
1
Fiber/Raw Material Preparation
Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
2
Laying
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Mosen's laying process mainly consists of dry laying, wet laying, and spin laying.
3
Bonding
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
4
Finishing
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
SSS Soft Hydrophilic Spunbond Non Woven Fabric For Diaper Making
Related Services
Quality control
Our factory implement quality control measures to ensure that materials meet specific standards or requirements.
Quality control
Material selection
We will help customers choose the best materials for their needs, based on factors such as comfort, durability, and price.
Material selection
Quality certification
Our factory obtain certification for their materials to demonstrate compliance with specific standards or requirements.
Quality certification
Related Knowledge
Related FAQ
1.Could l have my own logo on release paper?
Q:Could l have my own logo on release paper? A:Of course. We are very welcome OEM order, but it need additional cost.
2.What is the upstreaming material for the spunbond non woven fabric ?
Q:What is the upstreaming material for the spunbond non woven fabric ? A: Polypropylene
3.What is your spunlace non woven price ?
Q:What is your spunlace non woven price? A:Our price is absolutely competitive and we are offering an additional discount depending on your quantity.
4.Why I need to choose your raw materials?
Q:Why I need to choose your raw materials? A:We are 1. reliable supplier with consistent quality of materials 2. more reasonable prices 3. Best service.
5.What's the width of release paper?
Q:What's the width of release paper? A:As your demand.
6.What is your payment terms of baby diaper raw materials?
Q:What is your payment terms of baby diaper raw materials? A:30% deposit in advance and 70% balance before shipment. L/C is acceptable as well.
We offer you disposable hygiene product
raw materials with premium quality.
Cooperate Now

Email: info@juhuascm.com

MP/WhatsApp: +86-13599104026

Manufacturer Address:Room 1105B, Bld M1, Manhattan, Yulongwan, Shimao, Shuanglong Road, Meiling Street, Jinjiang, Fujian, China

NEW KEYWORD

About Us

Products

Information