Spunlace Non Woven Fabric for Wet Wipes Raw Materials
Spunlace non woven fabric is a roll-format hygiene material produced by entangling fibre webs with high-pressure fine water jets. WEIHONGLAI supplies this spunlace non woven fabric as a raw material for wet wipes production, in white roll form with a 76 mm core, and it is also positioned within the wider Non Woven Fabrics range for disposable hygiene products.
-
Composition: made from viscose and polyester.
-
Web structure: available in cross type or parallel type.
-
Surface pattern: available in plain or dot.
-
Primary application: wet wipes raw materials.
-
Loading reference: 9–10 tons per 40HQ.
What Is Spunlace Non Woven Fabric?
Spunlace non woven fabric is made by spraying high-pressure fine water flow onto one or more layers of fibre webs, so that the fibres become entangled with each other. The fibre web is thereby reinforced and gains a certain strength, and the resulting fabric is spunlace non woven fabric.
Processing Principle
The web is sprayed with multiple fine water jets generated under high pressure. After the water jet passes through the fibre web, it is rebounded by the dragged net curtain and penetrates the fibre web again. As a result, the fibres in the fibre web are displaced, interspersed, entangled and cohesive under the hydraulic action of the high-speed water jets in different directions. The fibre web is thereby reinforced.
Verified Specification and Inspection Results
The values below are the confirmed requirement and result data for this spunlace non woven fabric. They describe the tested roll and should be read together with the application and line conditions of your own wet wipes process.
|
Items
|
Unit
|
Requirement
|
Result
|
|
|
|
|
Color
|
/
|
white
|
white
|
|
|
Core inside diameter
|
mm
|
76±1
|
76
|
|
|
Basic weight
|
gsm
|
40±2
|
40.1
|
|
|
Width
|
mm
|
1000±2
|
1000
|
|
|
Thickness
|
mm
|
/
|
0.38
|
|
|
Capacity of liquid-absorbalility
|
/
|
≥700
|
966
|
|
|
Whiteness
|
%
|
≥80
|
88.2
|
|
|
Tensile strength
|
MD
|
N/5cm
|
≥15
|
20.6
|
|
|
CD
|
≥20
|
139
|
|
|
Breaking elongation
|
MD
|
%
|
/
|
131.8
|
|
|
CD
|
/
|
18
|
|
|
Others
|
Wrinkles/ corrugation
|
None
|
|
|
Roll edge appearance
|
Neat, Clean, No Obvious Defects
|
|
|
Contamination
|
No Obvious Contamination; Free From Foreign Matter
|
|
|
Holes/Thin spots/Formation
|
No Obvious Holes / Thin Spots / With Good Formation
|
|
Quality Checkpoints for Wet Wipes Production
When this spunlace non woven fabric is used as a wet wipes raw material, the following points are worth confirming against the supplied roll data before and during production.
|
Checkpoint
|
What to Confirm
|
Why It Matters
|
|
Basic weight
|
Confirm the roll GSM against the requirement range before running.
|
Affects the hand feel and the wet strength of the finished wipe.
|
|
Width and core
|
Match roll width and 76 mm core to the unwinding and slitting setup.
|
Reduces edge waste and web wandering on the line.
|
|
Liquid absorbability
|
Verify absorbability against the requirement value for the target lotion loading.
|
Supports consistent lotion pick-up in the finished pack.
|
|
Tensile strength and elongation
|
Review MD and CD values against the requirement values.
|
Helps predict runnability and resistance to tearing during converting.
|
|
Appearance and cleanliness
|
Check for wrinkles, contamination, holes and thin spots on the roll.
|
Protects the visual quality of the finished wet wipes.
|
Packing, Loading and Storage
This spunlace non woven fabric is supplied in roll form with a 76 mm core inside diameter. The confirmed loading reference for this material is 9–10 tons per 40HQ. Rolls should be kept in their original packing, stored dry and clean, and handled so that the roll edge and surface remain free from contamination and deformation. For container planning questions, the loading reference can be reviewed together with the confirmed roll width and GSM.
Samples and Trial Guidance
Before committing to a production lot, buyers can request a sample roll to evaluate hand feel, web structure (cross type or parallel type), surface pattern (plain or dot) and runnability on their own wet wipes line. Trial results should be compared against the verified specification values above, and any adjustment to GSM, width or pattern should be confirmed as a separate specification rather than assumed from this page.
Buyer Questions
What is this spunlace non woven fabric made from?
It is made from viscose and polyester.
What web structures and surface patterns are available?
The fabric can be cross type or parallel type, and it can be plain or dot.
What is the main application?
It is used as wet wipes raw material.
How much can be loaded in one 40HQ?
The confirmed loading reference is 9–10 tons per 40HQ. For a specific roll width and GSM, the loading plan can be reviewed together with the order details.
What core size does the roll use?
The core inside diameter is 76 mm, with a requirement of 76±1 mm.
Request a Quotation or Sample
To move forward, share your target GSM, roll width, web structure, surface pattern and expected order quantity. WEIHONGLAI can then confirm the matching spunlace non woven fabric specification, packing details and loading plan for your wet wipes production. You can also review the spunlace non woven fabric for wet wipes reference before sending your inquiry.
Email: info@whldiapernonwoven.com
MP/WhatsApp: +86-13599937366
Manufacturer Address:Room 1105B, Bld M1, Manhattan, Yulongwan, Shimao, Shuanglong Road, Meiling Street, Jinjiang, Fujian, China
