YOUR POSITION：HOME > Products > Tissue/Release Paper/Absorbent Paper >

Carrier Tissue for Baby Diaper Production

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Sanitary napkin,Baby diaper,Adult diaper
Minimum order quanity: 1000.00 kgs
Packing details: Paper board with transparent film

Quote
+86-13599104026

Product Description

Carrier tissue features:

carrier tissue is a common ingredient in the production of baby diapers. Carrier tissue is a type of paper that is used to wrap the absorbent core of a baby diaper. It is designed to be soft, flexible, and absorbent, and it helps to protect the absorbent core from moisture and other external elements. Additionally, carrier tissue also helps to keep the absorbent core in place and prevent it from shifting or migrating during use. The carrier tissue is typically made from a variety of materials, including virgin pulp, recycled paper, and synthetic fibers. These materials are processed to create a soft, absorbent tissue that is used to wrap the absorbent core of a baby diaper.

Product Detail & Custom Options:

Composition: 100% Imported fluff pulp

Weight: 13-18gsm

Width: 80mm-2800mm

Inner core diameter: 76mm

Outer diameter: 580/780mm

.Application: baby diaper, sanitary napkin and adult diaper

Loading quantity:15-18 tons/40HQ

All the test are lot production averages
Items	Unit	Requirement	Result
Basic weight	gsm	18	18.2
Core Inner Diameter	mm	76	76
Width	mm	160	160
Roll Diameter	cm	58	58
Whiteness	%,ISO	≥80	87
Absorbency	mm/100s	≥35	49
Water	%	6.5	7.7
Tendile Strength(MD)	mN	≥4000	5520
Tendile Strength(MD)	E(%)	≥20	24
Tendile Strength(CD)	mN	≥600	1858
Tendile Strength(CD)	E(%)	≥4	4.5

Products Categories

Related Resource

Carrier tissue tissue carrier tissue price baby diaper carrier tissue

Non-Woven Fabric Manufacturing

Fiber/Raw

Material

Preparation

Laying

Bonding

Finishing

Fiber/Raw Material Preparation

Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.

Laying

The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Juhua's laying process mainly consists of dry laying, wet laying, and spin laying.

Bonding

After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.

Finishing

Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.

Backsheets Manufacturing

Prilling

Film

Formation

Printing

Slitting

Prilling

The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.

Film Formation

There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.

Printing

Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.

Slitting

Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.

Related FAQ

1.What is the upstreaming material for the spunbond non woven fabric ?

Q:What is the upstreaming material for the spunbond non woven fabric ? A: Polypropylene

2.Can I put different raw materials into one container?

Q:Can I put different raw materials into one container? A:Yes, we can and make sure it is full loading to save your cost.

3.What is the leadtime of hygiene products raw materials?

7-15 after receiving the deposit.

4.What information do u need for diaper non woven fabric?

Q.What information do u need for diaper non woven fabric? A:You need to provide us non woven type, basic weight, width, function and quantity.

5.What hygiene product raw materials do you provide?

Q:What hygiene product raw materials do you provide? A:baby nappies, baby pull up diapers, adult diapers, baby diapers, wet wipes and other baby care products.

6.How many tons hydrophilic spunbond non woven fabric can be loaded in one 40HQ ?

Q:How many tons hydrophilic spunbond non woven fabric can be loaded in one 40HQ ? A:We can load 12 tons hydrophilic spunbond non woven fabric.