Sanitary Napkin PE Film for Wrapping Materials Manufacturer Advantage
Raw materials for hygiene products
High quality& Good Service
Sanitary Napkin PE Film for Wrapping Materials Related Quality Control
The moisture of each batch of incoming materials will be tested with a METTLER HS153 moisture analyzer to control the moisture content at ≤0.1%.
Gram Weight Detection
The weight of the Backsheet of each roller will be measured by a precision electronic balance, and the weight error will be controlled at ±1.5g.
The tension tester is used to test the tensile strength of the products, to control the tension is ≥2N in the lateral direction and ≥5N in the longitudinal direction.
In the production process, the Sanitary Napkin PE Film for Wrapping Materials which is off the slitting machine will be width tested with a tape measure, and width error range should be controled in ≤ 2 mm.
Sanitary Napkin PE Film for Wrapping Materials Manufacturing
The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.
There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.
Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.
Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.
Sanitary Napkin PE Film for Wrapping Materials Related Services
Our factory obtain certification for their materials to demonstrate compliance with specific standards or requirements.
You can visit our factory
What is the service of a diaper spunbond nonwoven factory? 1.Production of spunbond nonwoven materials in various widths, lengths, and gauges. 2.Development and testing of new products to meet customer specifications and industry standards. 3.Qual
Our upstream raw materials are high-quality materials.
Sanitary Napkin PE Film for Wrapping Materials Related Cases