YOUR POSITION：HOME > Products > Hot Melt Adhesive >

Construction glue for baby diaper raw materials

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Sanitary napkin,Baby diaper,Adult diaper
Minimum order quanity: 1000.00 kgs
Packing details: cartons packing

Quote
+86-13599104026

Product Description

Construction glue, also known as adhesive or glue, is a type of glue that is used for bonding various materials, such as paper, wood, metal, and plastic.

In the production of baby diapers, construction glue is often used to attach the different layers of the diaper, such as the absorbent core, the backsheet, and the leg cuffs.

The construction glue used in diaper production is typically a water-based adhesive, which is safe and gentle on the skin.

The glue is applied to the edges of the diaper components and then bonded together under heat and pressure.

The glue must be strong enough to hold the diaper components together during use, but it should also be gentle enough to avoid causing irritation or rashes on the skin.

Construction glue features:

Color:light yellow solid

Operating temperature:90-105℃

Appearance:square

Storage:Below 40℃, In a cool, dry place

Softening Point:76±2℃

Viscosity:90℃---5000Cps, 100℃---4000Cps,115℃---2500Cps

Shelf life:12 Months in dry and cool environment

Packing:18kgs/carton, 20kgs/carton

Loading quantity:12tons/20GP by pallets, 24tons/40HQ by pallets

All the test are lot production averages
Items	Unit	Requirement	Result	Method
color		light yellow solid	light yellow solid	Visual
Softening point	℃	76-90	82.8	Measurement

Products Categories

Related Products

More》

Related Resource

Construction glue hot melt glue construction glue price

Non-Woven Fabric Manufacturing

Fiber/Raw

Material

Preparation

Laying

Bonding

Finishing

Fiber/Raw Material Preparation

Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.

Laying

The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Juhua's laying process mainly consists of dry laying, wet laying, and spin laying.

Bonding

After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.

Finishing

Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.

Backsheets Manufacturing

Prilling

Film

Formation

Printing

Slitting

Prilling

The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.

Film Formation

There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.

Printing

Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.

Slitting

Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.

Related FAQ

1.Can I make our design on the PE film?

Q:Can I make our design on the PE film? A:It is ok and the colors are up to 6 colors.

2.Does the breathable film accept customization?

Q.Does the breathable film accept customization? A: Yes, your requirement for OEM or ODM is welcomed and can be satisfied.

3.Can I put different raw materials into one container?

Q:Can I put different raw materials into one container? A:Yes, we can and make sure it is full loading to save your cost.

4.What is the application of SSS spunbond polypropylene hydrophilic non woven fabric?

Q:What is the application of SSS spunbond polypropylene hydrophilic non woven fabric? A:Sanitary napkin topsheet, baby diaper topsheet and adult diaper topsheet.

5.What about the delivery time of PE film when I have my own design ?

Q:What about the delivery time of PE film when I have my own design ? A:Within 15-20 days after receiving deposit.

6.What is the leadtime of hygiene products raw materials?

7-15 after receiving the deposit.